We do have a couple of options that are similar to the Opti-Brite LED Strip Light for RV Awnings # ILL71CBAWN that you're looking for, but we do not have an exact copy of this LED light strip that is submersible.
Instead, take a look at the:
-Thinline Opti-Brite LED Utility Light Strip - Submersible # ILL72CB which measures 22" long, or the,
-Optronics Thinline LED Utility Light Bar - Submersible # BUL69CB which measures 15" long.
Either of these options will work great for you and... view full answer...
If you just need the replacement LED strip, then you'll just need the Replacement LED Light Strip for Solera RV Awnings # LC423331 and cut it down to fit your 14' awning.
If you are wanting to add a LED strip to an awning that does not already have a strip then you'll want the LED Fabric Light Kit with Switch/Plate for Solera RV Awning with Prepflex Fabric # LC674282 instead which includes the light strip, switch and plate. view full answer...
The Valterra Mini Rope Light you're referring too has been discontinued but yes you could cut it and splice it to a 12V power supply.
If you're just trying to add an LED light strip to replace your current LED lights, then I recommend just going with the LED Light Strip # DG52683.
This light strip is 16' long but can be cut every 3 LEDs, blue in color, and has an exposed end for you to be able to easily splice into your setup. view full answer...
I did some research on your cap LED light strips on your 2019 Grand Design Momentum 351M toy hauler. We do carry LED strips that are compatible.
- Optronics Flexible LED Light Strip - Weatherproof - White # UCL90CB
Also, if you need to connect two sections of LED strips together, you will need the connectors # A90P1B. view full answer...
For your application I recommend the LED Light Strip Kit with Wireless IR Remote # DG52694 as well as the Add-On LED Light Strip # DG52697 (which I confirmed will work together according to my contact at Diamond Group).
Each of these kits comes with 33' of light strip so you'll have right at the 66' length you're looking for, plus these have a rubber-type construction so they are flexible enough to accommodate the 90 degree angle you are needing to use. The light strips have 16 different... view full answer...
I recommend using the Optronics Flexible LED Light Strip - Weatherproof - White - 17' Long # UCL90CB, which is a weatherproof light that can be connected to an existing strip or wired directly to a 12v power source. These will be the perfect solution for the front of your Keystone Montana since they're weatherproof and they can be easily applied with the peel and stick backing.
I've linked a review video of these lights as well as the other LED strip lights we have available if you'd like... view full answer...
We do have the 12 foot cable as well as the T-connectors you are referring to for the LED Light Strip Kit with Wireless RF Remote DG52694RF.
What you need are the following parts:
- Power Extension Cord for LED Light Strip - 4 Pin to 4 Pin Connectors - 12' Long # DG52673PB
- 4-Pin Strip Connectors for Diamond LED Light Strips # DG52675PB view full answer...
The LED Light Strip Kit # DG52688 that you referenced is a great option to replace the lights on your patio. You are correct that you can add additional light strips, but that depends on how long they are.
The kit # DG52688 comes with a 16' length of LED lights but can only reach up to a little over 32 ' which means that you can only use one 16' LED Light Strip # DG52680 with it. For your application you would have to use 2 kits and 2 strips.
For a kit that can support up to 66' of LED... view full answer...
Roadmaster Diode # RM-790 can handle up to 85-amps of current so one should be sufficient to handle both the low beam and daytime running light circuit input signals you want to feed to your LED strip light.
It is fine to have two hot leads connected to the one diode so long as the total rating is high enough. view full answer...
The LED strip light I suggest based on your trailer length is the Optronics 17-foot weatherproof model # UCL90CB. This light strip comes on a reel and has a peel-and-stick 3M adhesive backing for easy installation. You can see this item in the linked video. The strip can even be cut to length.
Multiple strips can be linked together using parts # A90P1B and # A90PB which will make it easy to link lights strips on each side of the trailer as well as on the ceiling. I do recommend using... view full answer...
The easiest way for us to recommended the LED replacement light you need is if you can find the pin number sticker on the roller tube when the awning is fully extended and it starts with a "V" or an "RPO". With this number, we can help you get the precise lights you need. If you do not have the sticker, we would need to know the measurement of the center-arm to center-arm of the awning, whether the LED strip is rope-style or flat-backed, and the color of the lights. I would be happy to... view full answer...
After doing some research you can link up to three complete LED strips # DIA86QR end-to-end without adding in extra, higher gauge power wire or additional power supply units down the line.
If you have any further questions please reach back out to me and I will be more than happy to further assist you in your future endeavors. view full answer...
I may have a solution for you, but there is not a product that we carry that is going to meet all of the specifications that you're seeking and the biggest issue will be the power cord, which you can work around with an extension cord. The other option would be wiring the light directly to a dimmer switch that can be installed right inside your RV door and routed to a 12v power source to allow you the best solution for this. I'll provide you with the parts for both options.
If you want... view full answer...
We do have some LED strip lights that a multi-color and have a remote control but the kit you looked at, part # LC674282 is not. The lights are all white and it's controlled by a switch that you mount to the RV's wall.
For example, part # DG52688, is an LED light strip that uses an infrared remote, 16 color options, and is 16 feet long. It's not specifically designed to fit Solera awnings like the other kit you looked at but it sounds like it's more what you're looking for. view full answer...
To start, Forest River is typically wired for Furrion camera systems, so backup camera systems like the Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen # FOS43TASF would be the way to go. This system comes with a single camera and a 4.3" monitor. I actually recommend going with the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras - 5" Screen # FCE48TASL-05 which comes with a larger 5" screen and additional cameras that... view full answer...
I may have a solution for you, but most of our larger ceiling lights have switches built in. However, you can use a puck light like the LED RV Interior Light # 328-K-1050Q9, which does not have a switch and mounts on the ceiling surface. These lights are 4-1/2" in diameter and come with 9 bright LED diodes to provide a small and easy to install light solution for your Cedar Creek 5th Wheel. Another option would be the Opti-Brite Low Profile LED RV Dome Light - 390 Lumens - Round - Clear... view full answer...
Most of these tailgate light strips connect with a standard 4 way trailer connector, so the Curt # C56225 is exactly what you're looking for. This kit comes with the 4 way plug and all of the relays you'll need to install on the vehicle to activate the trailer tow lighting circuits.
I've linked an installation video of this harness for you to refer back to during installation. view full answer...
A standard 4-pole flat trailer connector carries brake light and turn signals on the same wires. Typically the yellow wire carries both left turn and stop light signals and the green wire carries both right turn and stop light signals. The brown wire carries the running light signal for both sides of the trailer and the white wire is the ground. Please refer to the photo attached.
In order to separate the turn and brake signals so they can be sent to separate lights you will need a vehicle-to-vehicle... view full answer...
One of the best products we have for this situation is the Red LED Safety Light, part # HF18R-HD . This is a magnet-base mounting light that offers high visibility and is battery powered.
Another option is the LED Safety Flare, part # PTW2368. This flare lasts for 50 hours off of batteries, and includes a magnet for mounting to metallic surfaces.
If your canoe is not magnetic or doesn't have an appropriate mounting plate, you'd need to fabricate a way to secure it to your trailer load... view full answer...
Go To Results